Smoke odor that comes back weeks later
We locate the source with thermal imaging and treat it with hydroxyl generators and thermal fogging. Soft contents get packed out for chamber treatment. If odor returns within 30 days, we re-treat at no charge.
Fire and Smoke Damage Restoration MARINA DEL REY CA starts with a call and ends with a certificate of completion. We handle soot, smoke odor, charred framing, and the water left behind by firefighting - in condos, apartments, and single-family homes from the Harbor to the Peninsula. If you need fire and smoke damage repair MARINA DEL REY California done right the first time, our IICRC-certified technicians are on call around the clock.

Fire and Smoke Damage Restoration MARINA DEL REY CA is the process of stabilizing a fire-damaged structure, removing soot and char, neutralizing smoke odor at the molecular level, and rebuilding what the flames or the fire hoses destroyed. It is not cleaning. Soot is acidic and etches glass, metal, and finished surfaces within hours. Smoke pushes into wall cavities, HVAC ducts, and attic insulation, and the water from firefighting soaks drywall and lumber that will grow mold in 48 to 72 hours if it is not dried. Our crews use thermal imaging cameras and moisture meters to find what the fire left behind.
In MARINA DEL REY, most calls come from two places: mid-rise condos along Via Marina and Admiralty Way where a kitchen fire on one floor sends smoke through shared corridors and vents, and single-family homes on the Peninsula where an electrical fire in the attic can smolder for an hour before anyone smells it. Salt air and coastal humidity make smoke odor cling harder to drywall and fabric here than inland, so we run hydroxyl generators longer and seal more surfaces. If you are searching for fire and smoke damage restoration near me MARINA DEL REY CA at 2 a.m., we answer and dispatch.
Every job is scoped to the specific loss, but these are the core items that show up on almost every fire and smoke damage restoration we run in MARINA DEL REY. If something is not on this list, we tell you before we start, not after.
Plywood over broken windows, tarps on roof damage, and utility shutoffs where needed. We secure the property the same day you call so the loss does not grow overnight.
Firefighting water gets extracted and the structure dried with Dri-Eaz and Phoenix air movers and dehumidifiers. Daily moisture readings are logged and shared with your adjuster.
HEPA vacuuming, chemical sponges, and degreasers on walls, ceilings, cabinets, and trim. We test the soot type first so the cleaning method matches the residue.
Hydroxyl generators for occupied spaces, ozone for vacant units, and thermal fogging for wall cavities and ductwork. We treat the source, not the air.
Charred lumber, ruined drywall, and unsalvageable contents get bagged and disposed of per Los Angeles County rules. The site is broom-clean before rebuild begins.
Drywall, insulation, lumber, primer, sealant, and paint replaced by our CSLB-licensed crew. Permits pulled where required and inspections coordinated through the city.
We answer 24/7 and dispatch within the hour for active losses. First priority is securing the structure: plywood over broken windows, tarp on the roof, shutoff of utilities if the fire marshal has not already done it. You get a written scope and a start date before we leave the property.
A FSRT-certified technician walks every room with a thermal imaging camera and moisture meter. We map soot travel - it follows air currents, so the room farthest from the fire often has the worst residue. You receive a room-by-room scope with photos, usually within 24 hours.
Before smoke cleanup, we extract standing water and set drying equipment. Air scrubbers with HEPA filters run continuously to capture airborne soot particles. Typical dry-down for a 1,200-square-foot unit is three to five days, monitored daily with moisture readings logged to the file.
Dry soot comes off with HEPA vacuums and chemical sponges. Wet or oily soot needs a degreaser and careful agitation so we do not drive it deeper into the drywall. After surfaces are clean, we run hydroxyl generators and thermal foggers to neutralize odor in cavities, ducts, and insulation.
Drywall, primer, sealant, paint, trim, and any charred lumber get replaced by our licensed crew. We do a final walkthrough with you, room by room, and hand over the completion packet: photos, moisture logs, and warranty paperwork. If your adjuster needs anything else, we send it that day.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hidden moisture and heat damage behind walls without tearing them open. We use it to map the true extent of the loss before we write the scope.
Captures airborne soot and smoke particles down to 0.3 microns. Runs continuously during demolition and cleaning to protect the rest of the home.
Neutralizes smoke odor in occupied spaces without the safety restrictions of ozone. We run these for 24 to 72 hours depending on the size of the loss.
Used in vacant units for deep odor treatment in wall cavities and ductwork. No one is allowed inside while it runs, and we air the space out afterward.
Air movers and dehumidifiers that dry the structure to IICRC S500 standard. Daily moisture readings are logged and shared with your adjuster.
Pin and pinless meters that read moisture content in drywall, lumber, and subfloor. We use them to confirm the structure is dry before rebuild starts.
The first line of soot removal. HEPA vacuums capture dry soot without spreading it, and chemical sponges lift residue from walls and ceilings.
A grease fire scorched the range hood, stained the ceiling, and sent smoke through the corridor into two neighboring units. The kitchen was unusable and the smell reached the bedroom closets.
We replaced the range hood and scorched drywall, treated all three units with hydroxyl generators, and repainted the kitchen and corridor. The job took 11 days from board-up to final walkthrough.
An electrical fire smoldered in the attic insulation for an hour before the smoke alarm woke the family. Charred framing and burned insulation left the attic unusable and smoke odor spread through the second floor.
We removed the burned insulation, replaced charred lumber, treated the roof cavity with thermal fogging, and ran hydroxyl generators for 72 hours. The family moved back in after 19 days.
A melted panel scorched the wall behind it and filled the unit with acrid smoke. The HOA required a certificate of insurance before any contractor could enter the building.
A licensed electrician replaced the panel, we removed the scorched drywall and treated the cavity, and the unit passed city inspection on the first try. The owner was back in 16 days.
The fire is out. The problems are just starting. These are the four issues we hear about most from homeowners and condo owners in MARINA DEL REY, and how we handle each one.
Ask a pro →We locate the source with thermal imaging and treat it with hydroxyl generators and thermal fogging. Soft contents get packed out for chamber treatment. If odor returns within 30 days, we re-treat at no charge.
We extract and dry to IICRC S500 standard before smoke cleanup begins. Moisture readings are logged daily and shared with your adjuster. If we find mold, we treat it under our CDPH-aligned protocol before rebuild.
We produce a room-by-room scope with photos, moisture maps, and line-item pricing within 24 hours. We meet your adjuster on site and answer their questions directly. Most claims close without a supplement.
We document each unit separately with its own scope and photo set. Landlords, tenants, and HOA boards each get the paperwork they need. Repairs start on the units that are clearly covered while the rest is sorted out.
Most residential fire and smoke damage restoration jobs in MARINA DEL REY CA run $3,500 to $18,000, with the average single-unit condo loss around $7,200 in 2026. A small kitchen fire with limited smoke travel can come in under $4,000. A multi-room loss with structural repairs pushes past $20,000. Insurance typically covers the restoration minus your deductible, and we bill carriers directly.
We board up the structure, extract firefighting water, and dry the framing before touching the smoke residue. Then we HEPA-vacuum and sponge off soot, treat surfaces with a degreaser where needed, and run hydroxyl generators and thermal foggers to neutralize odor in cavities and ducts. Finally we replace charred drywall, insulation, and trim, then prime and paint. The full sequence follows IICRC S700.
A contained kitchen fire in a 900-square-foot condo typically takes 7 to 14 days from board-up to final walkthrough. A multi-room fire with structural repairs runs 4 to 8 weeks. The drying phase alone is 3 to 5 days. We give you a written schedule after inspection and update it if the scope changes.
Yes. Standard California homeowners and condo HO-6 policies cover fire and smoke damage restoration, including smoke odor treatment, water damage from firefighting, and temporary housing if the unit is uninhabitable. We document the loss with photos and moisture logs, meet your adjuster on site, and bill the carrier directly so you are not fronting the full cost.
We answer 24/7, dispatch within the hour for active losses, and hand you a written scope before we leave. Licensed, insured, and IICRC-certified. One call gets a crew moving.
Call for Dispatch (833) 929-6186 →Call (833) 929-6186 any time - day, night, weekend, or holiday. A real person answers and can dispatch a crew immediately. We serve all of Marina del Rey and Los Angeles County, including ZIP 90292, and we typically arrive within 60 minutes for emergency calls. If you prefer email, reach us at info@firedamagerestorationmarinadelrey.com and we'll respond the same day.